Fluoramics Tufoil Lighting Grease | Raptor Supplies Türkiye
tr@raptorsupplies.com +44 203 287 5224

FLUORAMICS Tufoil Lighting Grease


Fluoramics Tufoil lightning greases are jelled versions of Fluoramics Tufoil greases for operating in significantly lower operating temperatures and extending machinery & bearing life. These easily sheared greases are suitable for applications requiring resistance to low break-out torque, stick...-slip and wear. They are also ideal for slides & bolts on firearms as they do not run after softening when the gun heats up.İncele

filtre
FLORAMİK 9121275A
FLORAMİK 9100004B
FLORAMİK 9100005C
FLORAMİK 9121262D
FLORAMİK 9121263E
Renk: Beyaz , Malzeme: Sentetik
stilModelkonteyner tipi+bedenÜcret
A
9121275		-Gres-€57.48
TEKLİF TALEBİ
A
9121270		-Gres-€23.10
TEKLİF TALEBİ
B
9100004		Plastik KavanozSentetik Gres0.25 lb€28.66
C
9100005		Plastik KavanozSentetik Gres0.5 lb€48.91
D
9121262		Plastik PistonSentetik Gres1"€88.35
E
9121263		TüpSentetik Gres125 Gram€31.54

Tufoil Aydınlatma Gresi

Fluoramics yıldırım gresleri, düşük sıcaklık, düşük koparma torku ve aşınma gerektiren uygulamalar için tasarlanmıştır ve bu nedenle dişliler, hassas veya servo yataklar ve step motorlar gibi makine parçalarında kullanım için idealdir. Bu dişli yağları, çalışma sıcaklığını düşürerek rulman ömrünü uzatmak için kullanılan formülasyonunda (5 mikron) son derece küçük süspansiyon parçacıkları içeren Tufoil teknolojisi sayesinde, tıkanıklıksız bir çalışma sağlamak için çok uygundur. Plastik kavanoz, plastik piston ve tüp tipi kaplarda sunulan ve 0.125 ile 453.59 gram arasında değişen boyutlarda sunulan bu Tufoil yıldırım greslerinin geniş yelpazesinden seçiminizi yapın. Raptor Supplies.

Çalışma Mekanizması

  • Fluoramics Tufoil lightning greases can be applied using a hand, grease brush or hand pack from a jar like any other grease. However, a grease gun may be required for using grease cartridges.
  • In old machines, users should first put a grease drop on the surface and operate the mechanism. Then wipe off any excess using a clean tissue.
  • The process needs to be repeated till the tissue does not get discoloured by dirt or metal debris left from the old lubricant.
  • Old bearings & mechanisms can be brought back to life by just dabbing on all surfaces & old sticky gearboxes.

Özellikler

  • Fluoramics Tufoil lightning greases are used in fine bearings, firearms, gears, steppers, servo bearings & robots.
  • They are rated at NLGI 1 with worked penetration of 351 at 77 degrees F & 60 strokes.
  • These lightning greases have a dropping point of 480 degrees F, above which they change from a semi-solid to a liquid state.
  • They have a smooth mixture without any lumps or foreign matter.

Sık Sorulan Sorular

What is the NLGI number in these Fluoramics Tufoil lightning greases?

NLGI number ( called "NLGI grade") or worked penetration refers to the relative hardness or measure of the stiffness of greases used for lubrication.

What are the sizes available in these Fluoramics Tufoil lightning greases?

  • 15 g jar
  • 1/4 lb kavanoz
  • 1/2 lb kavanoz
  • 1 lb kavanoz
  • 3 oz grease cartridge
  • 13.39 oz grease cartridge

What does shear stability mean in these Fluoramics Tufoil lightning greases?

Shear stability refers to the grease's resistance to viscosity loss due to exposure to mechanical loads. Long chain polymers of greases with low shear break down under thinner viscosity & heavy mechanical load resulting in accelerated internal engine wear & higher oil consumption. These Fluoramics Tufoil lightning greases have shear stability (extended work penetration) of 342 at 77 degrees F and 10000 / 100000 strokes.

Yardım etmek için buradayız!

Burada listelenmeyen bir parça mı arıyorsunuz?

Şimdi bizimle sohbet et

Daha keşfedin